• Image
  • Image
  • Image

Spray Sand on Truck

Place of Origin: Suphanburi
Brand: S keerati
S.KEERATI Limited Partnership
Fax:   +66 35 440 993
Mobile:   +66 86 329 4795, +66 82 252 3001, +66 35 440 992 (สำนักงานใหญ่)
Sandblasting and painting are used to clean surfaces.

Spray Sand on Truck

S.keerati Sandblasting Service is located at 11 Moo 4 Tumbol Moddeang, Sriprachan, Suphanburi.

Sandblasting is used to clean surfaces, remove rust, oxidation, or finishes, preparing surfaces for new coating applications. It is highly effective for large equipment, surface prepping and paint/rust removal.

Sandblasting is a general term used to describe the act of propelling very fine bits of material at high-velocity to clean or etch a surface. Sand used to be the most commonly used material, but since the lung disease silicosis is caused by extended inhalation of the dust created by sand, other materials are now used in its place. Any small, relatively uniform particles will work, such as steel grit, copper slag, walnut shells, powdered abrasives, even bits of coconut shell. Due to the dangers of inhaling dust during the process, sandblasting is carefully controlled, using an alternate air supply, protective wear, and proper ventilation.

A sandblasting setup usually consists of three different parts: the abrasive itself, an air compressor, and a blaster nozzle. For etching and small object cleaning, a workstation to hold the piece of glass is also needed, as is some sort of collector to gather up excess dust. Sandblasting is primarily used for two somewhat different applications. The first of these is to clean a surface of anything that may be clinging to it. The second is to either etch or carve designs or words into glass or a similar material.

Product inquiry
Send inquiry to
Your inquiry subject (*):
Your name (*):
Your email (*):
Your phone number
Your Line ID
Type your inquiry detail below (*)
Verified
Level 2 Saller
Address: Suphanburi Thailand
Fax:   +66 35 440 993
Mobile:   +66 86 329 4795, +66 82 252 3001, +66 35 440 992 (สำนักงานใหญ่)
More Products
View all
Rust peeling in construction project any type such as steel rod, steel wire of construction.
Brand: S keerati
Get a sand blasting job. free consultation We have a quality team to provide service, sincere, friendly prices.
Brand: S keerati
Sand used to be the most commonly used material, but since the lung disease silicosis is caused by extended inhalation.
Brand: S keerati
Sandblasting on metal surfaces With sand blasting or sand blasting (Sand blasting) renovation work. new steel skin both direct and accept work Sub-Contractor
Brand: S keerati
The first of these is to clean a surface of anything that may be clinging to it. The second is to either etch or carve designs or words into glass.
Brand: S keerati
Any small, relatively uniform particles will work, such as steel grit, copper slag, walnut shells, powdered abrasives, even bits of coconut shell.
Brand: S keerati
Thailand Trusted SMEs