อุปกรณ์รักษาความปลอดภัย

The L-Series HRL-LF (red) and HWL-LF (white) are 2-wire, 24 volt, 520Hz, wall sounders.

The L-Series P2RL-LF (red) and P2WL-LF (white) are 2-wire, 24 volt, 520Hz, wall sounder strobes.

L-Series, red, wall-mountable, chime that is unmarked.

L-Series, white, wall-mountable, chime that is unmarked.

L-Series, red, ceiling-mountable, clear lens, chime strobe that is unmarked. Selectable strobe settings: 15, 30, 75, 95, 115, 150, and 177 cd

L-Series, white, ceiling-mountable, clear lens, chime strobe that is unmarked. Selectable strobe settings: 15, 30, 75, 95, 115, 150, and 177 cd.

L-Series, red, wall-mountable, clear lens, chime strobe that is unmarked. Selectable strobe settings: 15, 30, 75, 95, 110, 135 and 185 cd.

L-Series, white, wall-mountable, clear lens, chime strobe that is unmarked. Selectable strobe settings: 15, 30, 75, 95, 110, 135 and 185 cd.

Photoelectronic Low-Profile Plug-In Detector for Special Applications Note: For pendent mount applications where remote testing is NOT needed, the 2151 needs to be used with either the B114LP or B114

The 2WT-B is a 2-wire, photoelectric i3 smoke detector with a 135°F fixed thermal sensor.

The 2WTA-B is a 2-wire, photoelectric i3 smoke detector with thermal sensor and built-in sounder.

The 2WTR-B is a 2-wire, photoelectric i3 smoke detector with thermal sensor and Form C relay.

The 4W-B is a 4-wire, photoelectric i3 smoke detector.

The 4WITAR-B is a 4-wire, photoelectric i3 smoke detector with isolated thermal sensor, built-in sounder, and Form C relay.

The 4WT-B is a 4-wire, photoelectric i3 smoke detector with a 135°F fixed thermal sensor.

The 4WTA-B is a 4-wire, photoelectric i3 smoke detector with thermal sensor and built-in sounder.

The 4WTAR-B is a 4-wire, photoelectric i3 smoke detector with thermal sensor, built-in sounder, and Form C relay.

The 4WTR-B is a 4-wire, photoelectric i3 smoke detector with thermal sensor and Form C relay.

The BEAM1224 is a 4-wire, single-ended, reflected type beam smoke detector that includes an 8" reflector.

The BEAM1224 is a 4-wire, single-ended, reflected type beam smoke detector that includes an 8" reflector and an integral sensitivity test.

The OSI-R-SS is a 4-wire, single-ended, reflected type beam smoke detector that includes an 8" reflector and an integral sensitivity test.

RK-MCU Master Control Unit is the central management device of the INTEVIO PA / VA system, which is used to manage and monitor all devices and perform various operations.

X-DA1500 high efficiency power amplifier provides audio signal amplification for the X-618 Digital Public Address and Voice Alarm System. X-DA1500 is reliable, efficient and light in weight.

Honeywell X-DA1500-B high efficiency power amplifier provides audio signal amplification for the X-618 Digital Public Address and Voice Alarm System. Honeywell X-DA1500-B is reliable, efficient and li

X-DA1500 high efficiency power amplifier provides audio signal amplification for the X-618 Digital Public Address and Voice Alarm System. X-DA1500 is reliable, efficient and light in weight.

X-MAP4P digital Audio player integrates common audio sources including SD, USB and FM tuner as well as upto-date Bluetooth connectivity.

DIGITAL MULTI-AUDIO PLAYER, BLUETOOTH | FM: 87.5 … 108 MHz| Signal-to-noise ratio: > 80 dB | Harmonic distortion at the nominal level: < 0.05 %

X-NPMI Configurable Network Paging Console is a key module in X-618 Digital Public Address and Voice Alarm System. It provides paging, monitoring, full duplex communication, touch screen operation and

X-NRI/EN-D Network Resource Interface is a universal interface of X-618 for external control access and audio extension. It is suitable to the needs of central interfaces management required by middle

The Local Control panel is the interface between field devices such as loudspeakers and local audio sources. EVACPRO-G2 is a cost effective solution for requirements less than 16 loudspeaker circuits(

The DKM18 allows for the expansion of a digital call station to increase the number of available keys and LEDs. It makes it easy to select loudspeaker circuits and transmit voice announcements for a n

With the Public Announcement Man Machine Interface (PAMMI) software’s Graphical User Interface, the Variodyn D1 Voice Alarm System can be seamlessly operated on a Windows-based computer. This GUI can

With 4 independent amplifier channels (100 V), the 4XD125B is compatible with the Variodyn D1 system and controlled by its DOM4-8 or DOM4-24. The NF inputs and control inputs are connected to the DOM

The 2XD250 power amplifier offers superior control and monitoring via the Variodyn D1’s DOM. It provides enhanced electronic protection against thermal overload and short-circuits during output. A low

Compatible with the Variodyn D1 PAVA system, the 2XD400 power amplifier is controlled by its DOM4-8 or DOM4-24 Digital Output Module. Both LF inputs and control input are connected to the DOM via a ca

The 4XD300 is controlled and monitored by the Variodyn D1 module’s DOM4-8 or DOM4-24 (Digital Output Module). It comes with a cooling unit socket located on its rear side for the mains connection and

The 4XD500 Power Amplifier has 4 independent amplifier channels (100 V) and is compatible with the Variodyn D1 PAVA system. The 100 V outputs are connected to the Variodyn D1’s module DOM with the out

The DCS15/DCS2 Digital Call Stations allow for the transmission of voice announcements, gongs and alarms. Each call station can generate and receive different voice transmissions and control signals i

The SCU serves as digital audio memory for Honeywell’s Variodyn D1 PAVA system. Connection to the Variodyn D1 can be established via the Ethernet. This unit can be used to log and record announcements

Honeywell’s Universal Interface Module (UIM) serves as an interface module for the Variodyn D1 PAVA system, connecting to it via its DAL-bus. It connects two analogue audio inputs, two analogue audio